|
East Central Illinois | We used to pull a 13 knife with our 5288 in pre-worked ground. No cutters or sealers on the bar and it worked fine pulling just a single 1000 tank. Now get the same bar in unworked ground and it didn't like it. Last year I pulled a 13 knife rental bar with cutters and sealers with our mx220 and it just played with it. That was in ground that had not been worked either. Ran about 6.5 mph and could have run faster if the ground had been smooth. | |
|
150 hp C-IH 7120 2-wd vs 13 knife NH3 bar
