|
Soutwest Ks. | I've fought that also. Take the cable loose from the flow meter and check if you have 5 volts then cross two wires together to see if you are getting a reading on the monitor. The operator's manual walks you through the steps to check this out. If the cable checks out, then it would almost have to be your flow meter. Take off your flow meter and check that it turns freely. If that all works correctly then it is possibly in your magnetic pick up on the top of the meter. Recently I had one doing that and I just replaced the sensor on the top of the flow meter to fix it. | |
|
raven monitor problems with nh3
