We filled the planter with seed for the first time today after upgrading our FMX to Version 7 and all appears to work good except for Vacuum Pressure monitoring. When I was on the run screen the pressure was maxing out at 5.69 and was erratic below that so I plumbed in a manual gauge and redid the calibration. When the calibration was complete the read out on the calibration screen was correct but when I went to the run screen it was still wrong.....It appeared to only be showing a portion of the pressure. 14.00 appears as 4.00 and so on. When I went into diagonistics it was showing the correct pressure. As anybody else experienced this? |