|
Paxton, IL | from your post, it sounds like you have everything installed correctly. Just to double check:
-footswitch is hooked up to the middle connector on the T2 box. (footswitch should be tied to pins 10 and 11 of that connector if I remember right)
-The "external switch" setting on the display is set to "remote engage"
-you have an AB line set up and you're within your distance offline that will allow it to engage.
-you press (and hold for a brief second) the footswitch while driving at a speed between your programmed minimum and maximum speeds. The EZ-steer should engage after you let off the switch.
If all the above is correct are you getting an error message when you try to engage? can you engage the EZ-Steer by hitting the button on the screen?
| |
|