|
ecsd | <p>When I loaded my burned 8820 JD combine, I just dug a hole 3-4 feet deep so the trailer is flush with the ground and pull, or in your case drive the combine over the trailer and put a chain around the back axle and to the trailer and pull the trailer out of the hole. As the trailer comes out of the hole it will lift the combine off the ground and you can take the tires off. I've been to an auction where they had 4 big forklifts, one on each tire around the axle. they all lift together and takes the tires off and back the trailer under it and let it down. It takes alot of man power and machinery, but they can have it loaded in ten minutes!</p>
Edited by jd9600 1/15/2013 23:58
| |
|
What method is used to get combine to sit on drop deck?
