|
Fargo, ND | First look at your current version of firmware on the 250. If it is v3.10 then you are up to date. If it is older proceed to the next step below.
Go here on the Trimble website: http://www.trimble.com/agriculture/technical_support.aspx?id=53997
Download version 3.10 to your computer. Unzip the folder then copy the firmware (the .img file) to a USB drive. Plug the USB drive into your 250 and turn it on. A message will show that you have new firmware on the USB. Follow the directions from there. If the USB doesn't work try a different one.
Edited by daveb 12/2/2012 16:10
| |
|