|
| I use an overhead hoist to do that.Block it up good underneath the front of the tranny,then I take the back bolts out of the frame.I leave the front weights on the tractor so that it is front heavy.With the chain hoist on the front I loosen the front side frame bolts so that you can spread them out.Now you can roll the complete front end forward.No need to remove the main hood or radiator this way.The engine will still be bolted to the tranny with four 1/2 capscrews.Support the front end with jack stands and then go back and remove engine with the hoist.I've done it more times than I can recall.Works for me. | |
|
Allis 7060 engine swap
