|
Great White North | Antenna on the roof, plug the harness that is on the roof into Port A on the receiver (I cant remember if Magnums use a Port B as well if they do plug into Port B).
NavII controller goes behind the seat in the back wall of the cab, under the window, behind little cover with 4 wing nuts holding it on. Attach the harness in side this panel to the nav controller. The controller should sit so the connectors are point towards the door side of the cab, hanging over the back of the seat installing it will be your right hand side. Flat side of the nav control box will face forward towards the seat.
Pro600/700 there will be a harness either on the front of the armrest if you have the armrest mounting bracket, or it will be on the window mount bar. Plug into the display. If the display has not been loaded with software you will need a CNH tech to load the software for you so it will run. | |
|
Trimble Autopilot
