|
| I have a PF Advantage in our 1460 that I noticed was flickering between instant and average bushels per acre on Saturday while combining beans. I kept an eye on the flow and it too would come and go. My Dad was combining yesterday and said the monitor only showed ZEROS all day long. I checked the elvator speed and it would only pickup rpms once in a while at an idle. I replaced the shaft speed sensor on the combine and it still would not pickup elevator speed with the combine wide open with the seperator on. I checked the cables that "T" into the sensor and they seem to be fine. What else can I check? Is it possible for the magnet to be "bad" on the auger shaft.
thanks in advance | |
|