|
NW Mississippi | One of our ITC's seems to have a problem with the TCM. That is all I can come up with after going through every other possible problem. It's TCM calibration values on flat and level ground are around 5.0 on any one of 3 tractors I tried it on and 10.0 on a 9770 sts. We had 3 tractors/planters planting cotton this spring w/ 2600's and the tractor with this receiver was the only one tracking to the side of the row. We are on RTK, and all three tractors had their TCM's calibrated and had the same point a lat/long and heading. Am I right, or am I overlooking something? | |
|
JD ITC TCM problem?
