|
roaming | yep
From the Home screen (the default screen when you turn it on), do this:
press > until you see Configuration
then press V once
then press > until you see Port A Config
then press V once
now press > once, and you should get a flashing cursor
press V until it says RTCM
press > once, then press V until it says 9600
press > once, and the cursor should now be on the bottom row, which probably currently says 801 TSIP 38k4
this needs to read 8N1 NMEA 4800, so continue using the > and V arrows to change the settings.
When you're done, the whole display should look like this:
Port A Cfg: I RTCM 9600
8N1 O NMEA 4800
When it looks like this, press the Enter button (looks like a broken arrow pointing to the left).
Now turn the key off, let everything shut down, and then key on. | |
|
UD+ not picking up satelite signal on 2366
