|
Central Nebraska | I don't know the number of the cable your speaking of, but if I remember correctly there are 3 sets of wires going to the sensor. 2 sets have to be unplugged so you can plug in Trimble's harness. Then on the other set there is like 4 or 5 wires going into one plug. 2 of the wires need to be cut. Get a set of instructions from your dealer and it is laid out very well in there. This was all on a 2009 model 9770 by the way. I never had any of those codes come up, I just has the one that has to do with the moisture sensor. There is a thread for that discussed on here a few days ago. | |
|
2010 JD9770/Insight/Autopilot questions
