|
Alberta | Hi,
I have a 262 on rtk that I am trying to send tsip data to my Ezguide 250 so that it will have Rtk. I don't have the antenna on the 250, I am bringing RS232 data in on pin 5 on the 250 and ground on pin 7. I have the cable in port B of the 262. I am sending cmr data to port B 38400 and tsip data out on port c at 115200, 8O1. Does that sound correct or what baud for the tsip, do I need the tsip to go both ways from the 250. I tried on the 250 using External Tsip and it just shows no communication with receiver.
Any help would be great
Curt
| |
|