smillhorn - 7/2/2011 10:49
Multiple v.26 Pro 600's running in our area all with the same problems
-Terrain compensation at 10-20mph through the rolling hills is poor compared to v.25 and any competing trimble systems. Irregardless of calibration
This is the opposite of what I have heard. I'm hearing much better online performance in v26, but poor acquisition when getting onto the line. What models, what size booms, etc?
smillhorn - 7/2/2011 10:49
-p gain must be changed for each field and soil condition to maintain line performance
Aggressiveness won't do it - you actually have to adjust pGain?
smillhorn - 7/2/2011 10:49
-600's reboot randomly while spraying
-600's "flash" randomly and dont fully reboot but will leave a stretch of missed coverage
Are all these displays running CNH datacards? Do they display error messages before rebooting? How many acres on them when they reboot? Can you describe the "flash" you're seeing? Have you sent any data in to CNH? Do you see this problem on sprayers running Pro 700s?
smillhorn - 7/2/2011 10:49
-coverage on the map is shown infront of the icon, or actually the icon is "behind" the application
Known issue to be fixed in a future software version. Doesn't affect application or shutoffs, just the picture on the map.
smillhorn - 7/2/2011 10:49
-when squaring an outside round if you shut off with the master, back around 90 degrees, turn on the master, the booms will fire on covered ground for 3 seconds and then turn off, then restart as they should when you get to uncovered ground. However the damage is already done.
What are your overlap settings? Is this with a Pro 600 or Pro 700? | 
Pro 600 Version 26 for Sprayers
