|
| Yes you can varible rate apply. Load the Prescription to the Data Card on the 2600, On side console rate knob choose AUX (1,2,3,Aux) this tells the system to look for the prescription for rate changes. Select the Client, Farm And Field on the 2600, Choose the Correct Task. Then go to the Documentation under the Application Tab choose your product then go to the "RX" button at the bottom right, choose the prescription from the drop down box, you could choose a look ahead time or a prescription multiplier if you want. This is all under the asumption that you have the Gen 4 spray rate controller with the newest software loaded. | |
|