|
Francesville, IN | 1. If the EZ-Guide 500 system is in a continuous boot loop, perform a soft reboot. To do this, hold down the top two buttons on the left (L1 and L2) while you turn on the system. This operation will not delete any data.
2. Make sure that the hitch-to-ground measurement is correct to avoid excess use of internal memory.
3. If the memory is legitimately exhausted, you must downgrade to firmware version 5.00 or use a swath pattern other than free form.
AgExpress can fix | |
|
EZ Guide 500 won't boot after update
