|
| Case IH 9250 with about 250HP pulling a JD 510 ripper at about 5.5 MPH. I am going at a depth similar to you at about 12 inches. I am in the medium hole on the shank going just about all the way in. I don't knowif the 512 has the 3 holes for adjustment for depth of the shank like the 510. I used to have it on a JD 8450 and I sometimes got into A4 or possibly B1 but I was in the shallow hole for the shank. I am in heavy clay soils in SW MN.
Edited by oke 10/26/2010 20:48
| |
|