|
OK Panhandle | Just configuring the VPN tunnel won't do what you're looking for, because it is a routed connection. What you need is a VPN tunnel PLUS a transport protocol to move the Ethernet frames for your surveillance subnet through your VPN tunnel. I don't know that you can configure that in the GUI. It will probably have to happen at the CLI or through configuration JSON files.
Here is a link to the EdgeRouter configuration for what it sounds like you need: https://help.ui.com/hc/en-us/articles/204961754-EdgeRouter-EoGRE-Lay...
Basically, you're looking for config information for Ethernet over IP, Ethernet over GRE, VXLAN, or some other layer 2 tunnelling protocol.
Wish I could help more, but I don't work with Ubiquiti routers or the specific NVR software you mentioned. Hope this at least gets you on the right track.
Edited by Kit 3/25/2024 13:50
| |
|