|
SE MN | I have been doing some research on a problem I'm running into that you may have experience with. It is very similar to this post and you were able to pass along some great advice.
I have a customer with an AgLeader 6500 rtk unit with a 900mhz radio. He desperately wants use his base with a FMX display unlocked to Rtk. It currently does not have an internal radio, but we certainly could install one. Otherwise we have access to a Freewave radio as well.
Wondering if you could give me some guidance on this? Is it feasable to communicate between the AgLeader RTK base and the FMX via a radio with either CMR+ or RCTM protocol?
Thanks in advance! | |
|
AgLeader RTK Base with Trimble Reciever
