|
Alden and Osage, IA | Most likely a GPS flier point.
I would guess your most likely don't have field boundaries programmed into your Versa. And possibly selected the field as you were going down the road (or somewhere not in that field).
If you don't have many acres done in this field, you can suspend the event, and reselect the field and start a new event. that will 'clear' the GPS boundary and allow the swath control to work again. This is relatively common with Ag Leader displays. Otherwise, you will have to tolerate the fact that AutoSwath won't work in that field for that operation.
If you were using an Integra, we could do the above step, then load the previous map as a reference layer. Doing that will allow AutoSwath to work as expected and bypass the flier point issue.
Edited by premiertech 5/26/2016 20:48
| |
|
Tech support-Why did my swath control quit working in my Versa??
