|
Sunnyside, WA | We have a 37 yard side dump made specifically for a farm. Was a 3 axle, but constantly breaking hubs while turning. Dropped tires on back axle and run it as a tandem. Used to tip it over a lot, but added more counter weights. Have welded quite a few cracks in the tub. Was a cheap setup when we pulled it with a JD 4840, but it wore that tractor out. Now pull it with a JD 8410 or 8420 so it has become a lot more expensive when you consider hours on those tractors.
The side dump has worked, but I think my next upgrade will be to a industrial 6x6 articulated dump truck
Here is the link to our side dump. We have a 28' triple axle
http://www.otars.us/
Edited by J. Sheehan 7/7/2015 22:47
| |
|