|
NW of Lincoln, NE | I do have the Spraying Systems Co valves. Since I couldn't see anything wrong with it I put it back together, cleaned out the filter and took all of the nozzles and screens off and ran some fresh water through everything. The valves seemed to work as they should, and after putting the nozzles back on I can't see any significant difference in one side versus the other. The pressure is also reading where it should when the tractor is at rated PTO speed and the sprayer is spraying, so I'm optimistic that was all that it needed.
I'll just cross my fingers and hope that everything is working like it's supposed to be when I'm loaded down with product and I'm out in the field in a day or two.
Thanks for your help. | |
|
Question from a Sprayer Newb…
