|
| I'm running field IQ on FMX for true count row clutches on corn planter. Only running row clutches not any rate control. Tried a dry run this afternoon want to start planting 2morrow. Problem is when I lift the planter it still paints on screen like I'm planting. I have implement switch that should shut it off when I lift but it still paints. Tested the implement switch with electrical tester and it seems to be working. So it seems that I either have something set wrong or am forgetting something since last year when it worked fine. I have the field IQ switch on Auto and section switch to the right in middle where it shows like its spraying. When I flip that switch up and down it will turn paint on and off. Also row clutches shut off normal when I overlap.
Any ideas on why my implement switch wont turn coverage off? I hope its just that Im forgetting something. Thanks | |
|