Posted 1/10/2012 00:47 (#2153071 - in reply to #2153065) Subject: Re: Upgradng EZ-Steer firmware... rookie question
Minnesota
Serial port adapters will come with a 9 pin male end, which will plug into the Female connector on the EZ Steer harness. Since these USB to serial adapters are usually about a 9" long cable, you can get a 4ft. serial cable with Male/Female ends so you don't need to get your laptop on the floor, behind the seat, or where ever the EZ steer controller has been strategically placed, if updating in the tractor cab.