|
Clatonia, NE | If the position is off consistently, you can add an implement offset to the Insight to make it log correctly. There is no reason that the position will drift if the Top Con receiver is outputting proper GGA position information. No matter if the screen show dGPS or DGPS. The Insight is just getting input--as long as the hertz is 5 and baud is 19200 or better, you should be able to correct this position error with the implement offset in the Implement configuration setup under GPS offsets. If it were because of drift, I believe the steering would drift as well. | |
|
Need help with Insight with Topcon receiver
