|
| I have a 2.4 ghz bridge from the house to the farm office. I have a second 5 ghz bridge from the house to the grain bins at the farm. The 2.4 had worked ok until lately it is less than 1/3 the transfer speed of the new 5 ghz bridge. Had two techs look at the settings and found everything set as it should be. Said it must be some kind of interference on that band. I'm out here all by myself so I can't imagine what developed all of a sudden on the 2.4. Really impressed with the 5 ghz bridge. It works fast and never has to be reset. Question is : If I just add a second 5 ghz radio at the farm and set it and the radio at the bins as clients and the radio at the house as multipoint are there any other settings I need to dig into. I did not set these bridges up and don't have a clue on tweeking anything but I have looked at the settings on each. I suppose I could add two 5 ghz radios and keep the two bridges but really don't think that is necessary. Any thoughts or suggestions.
Thanks | |
|
Settings on a wireless bridge and access point?
