|
| The picture on the side of the combine indicates there is are two grease zerks to grease the assembly that engages the unloading system, one near the big pulley on the bottom and one near the smaller pulley on top. I am talking about the double pulleys that tightens the unloading belts when you pull up on the unload button in the cab. I can find the zerk on the big pulley on the bottom but I can't find the one on the little top pulley. I am talking about the ones you have to stand on the tailings elevator to grease.
My combine does not have a straw chopper on it. Maybe that is why I can't find the top zerk because its not there because the top zerk has to do with a straw chopper? I assume the double pulley right inside of the double pulley for the unloading system is to drive the straw chopper if you have one, but those pulley are bare right now. Where's that zerk? It's been bugging me that I haven't been greasing it if it is indeed there.
Edited by sparrell 11/25/2009 19:52
 (DSCN1851 (Small).JPG)
Attachments
----------------
 DSCN1851 (Small).JPG (46KB - 93 downloads)
| |
|
Need help finding a grease zerk on JD 9400
