|
| Have had great luck before with tec support here so I'll try it again. We have a FMX hooked up to a 1770NT 16 row planter. We are trying to figure out how to display what the vacuum is on the main run page. We have boom pressure, but that only gives a single number and it is in psi. The pump pressure is set up to the liquid fert sensor. We can go into diagnostics and look at the pressures (both sides) but that is not very handy. Any ideas. We have the variable rate drives and modules if that makes a difference.
Alan | |
|
FMX and JD 1770NT vacuum readings
