|
Highland co. Ohio | I run an 1990ccs on my 8310 with no problems. Scv 1 is on lift set to max flow, scv2 for fold, and use scv 4 for the fan set around “3” on the flow control. All hoses return to the scv stack except the case drain.
As long as there are no leaks the hydraulic downforce shouldn’t use much flow when not raising or lowering, I guess the fan could be leaking internally and blowing oil back the case drain line. Possible sensor problem? Seems like my 8400 is going thru a random sensor or 2 a year until I get them all updated.
Just shooting from the hip, good luck, it been a good combo for me. | |
|