|
The Netherlands | Do you have FM750 or CFX750 ? Or the newer GFX750 or XCN 750 ?
What firmware do you use? If you do a roll offset calibration and the bare tractor is 2 feet off track on the return pass then the orientation of the T2
controller is not good or the T2 box could be broken.
But if your firmware is old that could also be an issue.
Is your antenna in the center line of cab and tractor?
Edited by Josh7 5/17/2021 01:19
Attachments ---------------- New Holland Trimble FM-750-User-Guide-7B.pdf (3911KB - 60 downloads) EZSteerSystemGuidev3.00RevB.pdf (3320KB - 60 downloads)
| |
|