|
central mich |
So my rate 1 calc is at 10gpa. My rate 2 calc was 40 gpa . But I wanted to set rate 2 calc to 15 gpa. So I pushed rate 2 button(#8 button) and then pushed enter, entered 15.0 on rate 2 calc button (#8) and pushed enter again.
So now when I push Rate 1 Calc button (button 7) I see 10.0 gpa as rate calc and when I push Rate 2 Calc button (#8) see 15.0 gpa as rate calc.
Since I am not moving I see nothing on the screen if I use the toggle to see the spraying GPA. I think this is right. So if want I to spray 15 gpa I place the toogle at Rate 2 but I was thinking if I put the toggle at Rate 2 that the calc Rate would automatically show 15 gpa or do I have to push button 8 to display the target rate of 15 gpa.
But if I push speed then on left side of screen I see rate. (I assume that is the actual spraying rate) and the speed would show on right hand side of screen.
I had forgotten since I dont use that Raven very often.
Did I do it correctly? | |
|
Did I set the GPA on a Raven SCS 440 correctly???
