AgTalk Home
AgTalk Home
Search Forums | Classifieds | Skins | Language
You are logged in as a guest. ( logon | register )

Field IQ and 750 irritation
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
Kooiker
Posted 5/6/2021 22:27 (#8991329 - in reply to #8990811)
Subject: RE: Field IQ and 750 irritation



clausenm - 5/6/2021 16:32 As already said, set "valve on" latency to something bigger than zero. The system uses that time setting to turn on the valves early to compensate for the fact that no valves are instantly on. For my ball valve setups my eyeball says 1-2 seconds usually from turn on till you see spray that would hit the ground. Valve off latency set to zero will not leave skips but will overlap some because no valves shut off instantly. I typically leave that at zero because I would rather overshoot a bit than a skip. Then there is alse the "planned overlap" setting that will purposely try to overlap if you want. This is not time based but a distance. Many annoying things about trimble stuff but I always thought the latency and planned overlap worked well.




marking




Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)