|
SE NE | Tedbear, you were right on it.
Last night I was trying to figure out what was going on so I disconnected the 6 pole connector then disconnected the airline to section 1 and as I suspected there was air going out to the section. Because the section/air would turn OFF when the section switch was ON I knew the valve itself must be working but the air flow was completely backward. Then I saw the schematic of the valve which I hadn’t checked before and what do you know it’s completely backward. I have no idea how the guy who I bought it from ever had it working but I’ll re work the valve so 1 is supply and 2 is to the section and I’m assuming everything will work fine.
Thanks for the help.
 (IMG_3962 (full).jpg)
Attachments
----------------
 IMG_3962 (full).jpg (111KB - 63 downloads)
| |
|
InCommand Coverage Logging and Clutch Problem
