|
East Central, Nebraska | so we have a deere in our fleet that we went with factory guidance on. i have very little knowledge of deere autotrac. had been working fine for two years and now all the sudden will not steer right. it will correct to the left and then when it gets over the line it does nothing until it realizes it isn't doing anything and then gives us a 'steering controller fault'.
tech at deere says they have a piece on the valve that they replace fairly frequently on the 8000s that almost always fixes the problem. says its $1600. anyone have any more technical advice to try before we go to the experiment with new parts approach?
deere 9330 4wd factory valve, 2630, sf3000 on sf1.
thank you. | |
|