AgTalk Home
AgTalk Home
Search Forums | Classifieds (107) | Skins | Language
You are logged in as a guest. ( logon | register )

Using a trimble AgGPS 542 for a repeater.
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
Dogface1SG
Posted 4/6/2021 10:09 (#8936284 - in reply to #8935608)
Subject: RE: Using a trimble AgGPS 542 for a repeater.


NW Ohio
Here is the support bulletin less the pictures.

1. Power on the AgGPS 542 GNSS receiver.
2. Press Enter twice to Mode setting. Then press the up or down arrow keys to set Mode as Radio:
3. Press Enter until Radio Config setting. Then press the up or down arrow keys to set Radio Config to Repeater:
4. Press Enter until Radio Repeater setting. Then press the up or down arrow keys to set Radio Repeater to the position number of the repeater(for example, Repeater 1, Repeater 2):


Edited by Dogface1SG 4/6/2021 10:09
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)