|
| Ez-Boom works with old EZ-Guide 500 (and FMX with very very old firmware).
Can control 10 sections. Section On will give +12 V on wire and off 0 V.
Not too much current should be taken out of EZ-Boon. If section clutches, valves, or what ewer need many Amps current then better to use relays.
Pinout for Amphenol connectors of EZ-Boom cab be found in this NAT thread (+many other sites: just go on and google....)
https://talk.newagtalk.com/forums/thread-view.asp?tid=612510&Display...
b | |
|
ez boom question
