just a tish NE of central ND | I don't think they were terrible high priced from case.They can be a bugger to get out of the tandam. They were drilled for either 10 or 12 inch spacing. They use dinkey little bearings and hubs and a dinky sized stump to hold the adjustment nut(:They were one time sold as a repair kit/ nut/cotter/washers/ on a bubble card.
My first concord had all welded in place spindles.
Edited by School Of Hard Knock 3/3/2021 18:49
|
Concord Drill, packer axle spindles
