|
Northeast Nebraska | Just did one on a 4755 from fehr. Did the corner post with the plastic backing and went on very nicely. I was to cheap to do the lower half with the plastic backing. I regret it now. I cleaned the cab up good by scraping and wire wheel. Then fitted everything the way I wanted it. This took a long time to do a good job lots of cutting pieces to fit correctly. The first one I thought I had it the way I wanted it and I glued it and it didnt fit very good so I ended up with some wrinkles. You dont have much time after you glue. Take your time doing it and you will be happy. | |
|
John Deere 4450 cab kit information
