|
Pilot Grove, Missouri | You can also fill the system with fluid. Gravity bleed it first, by simply opening the bleeder on the slave cyl. and waiting for fluid to drip out. Make sure to keep the resorvoir full of fluid. Then close the bleeder and push the rod back into the slave cyl. rapidly. Let the rod come back out very slowly. Repeat this process several times. May take quite a few. and then check to see if you have pedal. This method also forces the air back through the master cylinder. This method has never failed for me, even on some vehicles that have long lines with high spots that like to trap air. Patrick | |
|
Bleeding Hydraulic Clutch
