SE Manitoba | roo - 3/2/2021 21:36
I took the side panel off yesterday. The shift linkage is fine. The problem is in the synchronizer that slides back and forth when it’s shifted. I’d take it apart but wanted to make sure I could get parts first. And I was hoping to ask a tech about it first. Plus, I use the mixer every day. I sent an Email to the address you see on the side of the gearbox but no reply. I’d call but I don’t speak Italian.
You might be quite surprized - - - - - they usually have someone that speaks English.
"Mi non parlo Italiano" is how you start.
Next "Do you speak English" to the first voice on the phone.
They will direct you to someone who will help (usually).
Don't forget the timezone difference.
(+7 hours from Central time)
good luck |