AgTalk Home
AgTalk Home
Search Forums | Classifieds (119) | Skins | Language
You are logged in as a guest. ( logon | register )

NMEA output from Starfire 600 to Case IH Pro 700
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
Artic
Posted 3/1/2021 17:27 (#8866380 - in reply to #8866350)
Subject: RE: NMEA output from Starfire 600 to Case IH Pro 700


Could it be a D9-Sub connector data ground issue?

https://www.caseih.com/northamerica/en-us/owners-site/Pages/AFS-Prod...

"On the AFS Pro 600 and AFS Pro 700, there are 4 Connection Type options on the Toolbox > GPS screen. nWhich one should I use?


CAN-A: Used with AFS AccuGuide systems on most Case IH tractors, Patriot sprayers, and Titan floaters

CAN-B: Used with AFS AccuGuide systems on most Case IH combines.

RS232A: Use if connecting any GPS receiver to the flat 5-pin connection on a 2100/2300/2500 series combine or universal tractor/planter harness. This setting is also used when connecting a serial receiver to the 10-pin connector on an 88 Series or 10/20/130/140/230/240 Series combine.

RS232B: Use if connecting any GPS receiver to the DE-9 connector on the bottom of the AFS Pro 600 or the back of the AFS Pro 700. IMPORTANT: This connector does not provide a ground for the data signal. If you experience difficulty establishing communication via the RS232B connection, contact your local Case IH dealer."
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)