|
NW Iowa | Have you had the steering sensor and steering valve calibrated after install?
Try swapping out your Ag25, i have seen some go bad
Not sure on the 750 but on the 1000 you can watch your steering angle in the diagnostics screen and look for dead spot or jump. You can also watch your CAN signal.
What version NAV and monitor do you have.
They also do not like voltage spikes. Check your battery and your frame ground. Are you using a CAN power harness or going straight to battery?
Edited by Massey1155 3/1/2021 14:42
| |
|
Agco Massey
