|
E ND | There are quite a few top coats out there, one we use is Nyalic. There's a prep wash, tape off glass, etc. and spray it on over pretty much everything else. Leaves a clear coat type finish that seals everything up, keeps corrosion away and cleans up easier. I wouldn't say it's "non-stick" but it does give material less to stick to so it would probably work. They offer it in rattle cans also to touch up, not sure how it would work to do the whole machine that way.
It is tough to do a show-room type finish with it, tends to orange peel and run a little but if you're looking for function, it does work.
| |
|