Posted 2/25/2021 08:38 (#8856977 - in reply to #8856557) Subject: RE: Field IQ Help
On CFX/FM-750 no special apps are needed for setting up Field-IQ.
Just go to Implement settings and select Field-IQ....
If it does not find Field-IQ units check cabling. Use A or B port on the display. (There might be CAN on the power connector also, but is does not work with Field-IQ).
There also has to be a CAN-line terminator like neo-ag said. (Terminator is a 120 ohm resistor between CAN-HI and CAN-LO lines).
If you need to update the firmware of of the Field-IQ unit(s) you can download them from agtogo.com
Just unzip the files to USB-root directory (if I remember right) and put the stick to your FM/CFX-750...
It is now several years ago that I got my Field-IQ for CFX-750. At first it was kind of difficult compared to EZ-Boom and EZ-Guide 500. Had to search quite a bit from internet... But got it going on my own anyways...
I now looked at those files and there in one piece of information that might be of value:
"All Modules have 3 Power sources. Module must have power to all 3 sources to be recognized by display"