AgTalk Home
AgTalk Home
Search Forums | Classifieds (4) | Skins | Language
You are logged in as a guest. ( logon | register )

who grows corn without using NH3?
View previous thread :: View next thread
   Forums List -> Crop TalkMessage format
 
Tom N
Posted 2/22/2021 18:09 (#8851551 - in reply to #8851342)
Subject: RE: who grows corn without using NH3?


Missouri river bottom south of Sioux City, IA
It’s a 60 foot bar with 24 coulters. Three sections so I used 1 inch ID hose off those three valves to the rows. Each valve handles 8 coulters. From there I put the plumbing you see in the pic.

The screen and orifice for the Y drops are in the check valve. From there it goes into the push-in two way divider and then though my Y tube frame. On the other end of the plumbing is a hose barb. A half inch hose goes on that to the coulter with a check valve about a foot from the screen and orifice. I did check the flow out of the two Y drops hoses on the rows and they were close to the same flow. If it was an issue I could come off the push-in two way divider and use two check valves to each side of the Y drop. I think I was running about 25 psi.

I plan on putting a few more of these together for area farmers.

Tom N.




(Y drop - coulter plumbing (full).jpg)



Attachments
----------------
Attachments Y drop - coulter plumbing (full).jpg (72KB - 1 downloads)
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)