|
Near Intersection of I-35 & I-90 Southern Mn. | I purchased used Hagie STS 10 late last Summer and haven't used it yet. It has the standalone Norac UC4 boom height system in it. Some years ago I had a Deere 4720 with a Norac UC4+ in it.
With flat land I didn't really need it much but it seemed to work fine as I recall. Since that sprayer was used and came from Wisconsin, it had 5 sensors rather than the standard 3.
We will be using MySideDrops with this sprayer and it would seem that having auto boom height would be helpful. My questions are 1) will the Norac 4 with 3 sensors be adequate? 2) would the Norac 4+ be a significant improvement? 3) if so what is involved with changing a UC4 to a UC4+?
It appears that the current version is the UC7 which must have some other enhancements. I will be running this with an InCommand 1200 so I guess the Ag Leader module would be yet another choice. When I had the Deere sprayer, having the UC4+ as a separate system and display was fine.
I would appreciate any comments or suggestions. TIA
Edited by tedbear 2/20/2021 11:16
| |
|
|