|
| you can pour and roll epoxy on with a paint roller and long handle. Its pretty simple to do, the smell may be an issue but go away after half a day if you can ventilate the room. I would also note that you want to mind the temperature when you apply it because it can flash off quickly and cause bubbles depending on the temps and airflow. However, I would be concerned with your floor prep given that you had to remove glued on tiles which could leave a residue, they would normally grind and sand on a floor to prep it for epoxy to get a good bond.
You may look into a floating, snap-lock LVT or laminate flooring instead. Easy to install, clean and cheap. | |
|
Best solution to cover a cement floor
