|
Clifton Kansas | On the planter I don't have an implement switch so my things can run all the time when not using the switches or auto swath.
I don't always have accurate boundaries (sometimes it is outside and sometimes it is inside planted area) so I turn off auto swath and plant ends. Then when planting field I turn on auto swath and use headland management and set it to smaller than the width I planted say 70ft on a 2 swath 40ft planter that gives me a 10 foot leeway. This makes an area for the clutches to stop inside of field boundary when entered into. By doing this the planter clutches stay turned off when it hangs over the planted area but inside the boundary. Works good for me.
| |
|
Another Ag Leader question
