|
| Norac UC7 is ISO11783 compliant so as long as the display is compliant, it will work. I have seen many UC5 systems ran through the UT/VT and have never had an issue bad enough to cause the machine to stop spraying. Auto boom height may not work but manual through the control handle or switch to control the boom height will still work. In most, if not all cases, Norac will tee into the valves that control the boom so it can take over when engaged then kick out when the manual buttons are pressed. I think the Raven rep was just pulling your chain because Norac does not play well with Raven displays. I have seen it ran through Ag Leader and JD 2630 and there were no issues. | |
|