|
| I have two on the suction side of my pump. I run everything through the inductors including dry AMS.
You have to be sure there is enough water flowing to dissolve the AMS -- and you might plug a downstream screen if you run it through too fast.
Also, be smart about mixing order and letting products flow through before you add the next. Some things are OK to mix together....some are NOT.
I just rinse the inductor a couple times between crops and I have not had an issue with contamination.
I have not had an issue running AMS or chemicals through the pumps. The pumps seem to out-last the engines. | |
|
Top loading sprayer
